How to Fix a Dead Kia Picanto Key Fob
The Kia Picanto is a city car that can zip through traffic gaps and width limitations as if they weren't there. It is a compact car with lots of features.
There are many reasons that the key fob in your Kia Picanto could not function. The most frequent reason is a dead battery.
Dead Coin Battery
A dead battery is the most frequent cause of a Kia Picanto's key fob not working. Usually the key fob will show warning signs prior to it dying and loses range or showing erratic behavior. It is recommended to replace your battery in the event that you notice any of these symptoms before the battery fails completely. Use a battery that has the same voltage, size, and specifications as the original.
If the key fob does not work, it might be an appropriate time to go to a dealer for a new one. Only then can you be sure that the new key fob will be compatible with your vehicle, and correctly programmed. If you attempt to program the key fob improperly the internal chip may be damaged and stop working.
Another possibility is that the receiver module has developed an issue. This could be the result of damaged chips or wear and tear as time passes. It's sometimes difficult to spot the signs of this issue, but it's important to investigate whenever you can. If your key fob isn't working, or if the spare doesn't work it is recommended that you contact an auto dealer for assistance. They'll be able identify the issue and fix it for you.
Faulty Chip
The key fob houses the chip that transmits a signal to a computer within the car. If the chip gets corrupted it will not send the correct code and the immobilizer system of the car will be activated. This could be due to many reasons. One of the causes is a battery that is not fully charged in the key fob. Water damage is another possibility. If the fob gets wet, it's likely that it will cease to function.
A defective chip could be the cause for the Picanto key fob not turning on the engine. If you have replaced the battery and tried reprogramming the fob but it isn't working, it could be because the circuit board is damaged. It is necessary to replace the circuit board If this is the case.
Press the button on the back of the key to open the fob. After this, you can take off the mechanical key. The video below will show how to replace the battery inside the key fob. Make sure you use a new battery that is similar in size and voltage. The Fob may be damaged if you choose the wrong type battery. After replacing the battery, you should check it by pressing the lock button. If it works, you have a reliable Fob.
Faulty Receiver Module
Your key fob is subject to quite a beating and isn't a perfect piece of equipment. Over time, the contacts with batteries and buttons may get damaged and stop functioning properly. Fortunately, it's quite simple to fix this on your own using a few tools.
To replacement kia key www.thekeylab.co.uk , the fob needs to send a signal to a receiver inside your car. If this module is damaged it will not be able open or start your car. There are a myriad of possible causes The first thing to do is reset the fob.
This is done by disconnecting the cable and then letting the battery with 12 volts drain completely. Then, reconnecting the positive and negative cables in reverse order.
If the battery is functioning and the device is not suffering from water damage, it could simply be having issues with its signal. It could be due to several reasons, including interference from nearby transmitters as well as objects that use the exact same frequency band as the Picanto Receiver.
Key fobs have rubber seals which prevent the chip from getting wet. However when they are submerged in water, the chip could be destroyed. It is essential to keep your key fob dry of water and only use key fobs with waterproof designs.
Poor programming
Kia Picanto's keys make it easy to unlock and start your vehicle. You can also make use of the key fob to control your vehicle. It is crucial to understand how to make use of the key fob effectively, especially when driving in bad weather or if you have limited mobility. There are a number of Kia Picanto keys tricks that can help you.
If your key fob has stopped functioning out of the blue, it could have a problem with its internal chip. It's rare however it is possible. It is best to visit a Kia dealer to pinpoint the problem.
You can also reset the Picanto keyfob. The process is simple and can be accomplished at home. The first step is to remove the key fob from the ignition switch. Connect the diagnostic tool under the dashboard to the OBDII connector and start the engine. The diagnostic tool will ask you for information about the Picanto. This includes the VIN, make and model.
You can also check the battery for a dead coin battery. The metal retaining clips inside the key fob are designed to hold the battery in place and complete the circuit. If the retaining clip is not secure it could interrupt the flow of electric current, resulting in an interruption in the function.